Back to Tools DirectorySafe Isolation Procedure (HSE GS38) Guide

Electrical Fault Finding & Safe Isolation Engine

Systematic root-cause diagnostic decision trees for commercial and domestic electrical faults. Follow structured testing sequences under BS 7671:2018+A4:2026, Electricity at Work Regulations 1989 Regulation 14, and HSE Guidance Note GS38. Select a diagnostic bay below to begin.

Plant-Room Ready: This diagnostic instrument caches locally for 100% offline testing in basements and switchrooms without mobile network reception.
1-Click Quick Presets:Tap for instant on-site sizing
Select a preset above to auto-fill common circuit values
1. Diagnostic Pathway Selection
Step 1: Diagnostic Decision Node

Loading diagnostic step...

Diagnostic History
Starting diagnostic sequence...

Diagnostic Telemetry

Statutory Authority: BS 7671:2018+A4 • EAWR 1989Protocol: HSE GS38 Standard
Root Cause Finding & SeverityIN PROGRESS
Follow Sequence Prompts
Decision Path: Node 1 of 5
StartInvestigatingVerdict
Required Engineering Action:
  • Select an answer branch on the left to advance the diagnostic tree.
Statutory CitationsBS 7671 / EAWR
HSE GS38 §7EAWR 1989 Reg 14
Test Instrument Pre-Checks & Environmental SettingsStandard: TN-C-S · 20°C · GS38 Verified Probes
HSE GS38 Test Lead Inspection
Supply Earthing & Temperature
Statutory Guidance

EAWR 1989 Regulation 14: No person shall be engaged in any work activity on or so near any live conductor that danger may arise, unless it is unreasonable in all circumstances for it to be dead.

HSE GS38 §7: Voltage detectors must be proved on a known source immediately before and after testing.

Glass-Box Diagnostic Derivation Pad

Diagnostic RuleStatutory FormulaValues SubstitutedAssessment Result
Max Zs 80% RuleZs_cold ≤ 0.80 × Zs_tab0.80 × 1.37 Ω (32A Type B)≤ 1.10 Ω (Cold Limit)
RCD Cumulative LeakageI_leak ≤ 0.30 × I_Δn (Reg 531.3.2)0.30 × 30 mA floor≤ 9.0 mA Standing
Insulation ResistanceR_ins ≥ 1.0 MΩ (Table 64)500 Vdc Test Voltage≥ 1.0 MΩ Pass Threshold
NEMA Voltage Unbalance%_unbal = (MaxDev / V_avg) × 100Polyphase Supply Line Deviations≤ 1.0% Normal / > 5% Stop
Safe Isolation ProtocolProve → Test → Prove (GS38)Known Source → Circuit → Known SourceEAWR Reg 14 Compliant
Sparks Switchboard
Quick: