18TH EDITION STANDARDS TIMELINE // STATUTORY TRACKER

BS 7671 Amendment Tracker

Objective chronological record of BS 7671:2018 amendments, published transition milestones, and current regulatory standing. Not advisory: no compliance checklists or prescriptive installation guidance.

CURRENT STANDARDBS 7671:2018+A4:2026Pub: 15 April 2026

Amendment 4:2026 (The Orange Book)

Mandatory standard across the UK. Clarifies that Code C3 does not warrant an Unsatisfactory EICR while Code FI requires an Unsatisfactory outcome, introduces stationary secondary battery storage chapter, establishes Section 716 PoE requirements, and recognises PNB earthing.

DISPOSITIONSole UK benchmark for all new electrical design, installation, and certification work.
WITHDRAWNBS 7671:2018+A3:2024Pub: 31 July 2024

Amendment 3:2024

Standalone amendment addressing bidirectional protective devices where power flows both directions (solar PV, battery storage export, V2G). Mandates verification of manufacturer bidirectional ratings and assembly thermal limits.

DISPOSITIONContent absorbed into BS 7671:2018+A4:2026.
WITHDRAWNBS 7671:2018+A2:2022Pub: 28 March 2022

Amendment 2:2022 (The Brown Book)

Major consolidated revision. Introduced mandatory AFDDs for socket circuits up to 32A in Higher-Risk Residential Buildings (HRRBs), Chapter 82 Prosumer Low-Voltage Electrical Installations, overhauled surge protection (Regulation 443.4.1), and restricted Type AC RCDs.

DISPOSITIONConsolidated edition absorbed into BS 7671:2018+A4:2026.
WITHDRAWNBS 7671:2018+A1:2020Pub: 1 February 2020

Amendment 1:2020

Standalone EV charging amendment overhauling Section 722. Revised Regulation 722.411.4.1 regarding open-PEN protective device earthing methods for electric vehicle charging equipment connected to PME supplies.

DISPOSITIONContent consolidated into BS 7671:2018+A2:2022 and carried into A4:2026.
CHRONOLOGICAL STANDARDS RAIL

18th Edition Standards Timeline & Transition Milestones

Chronological record of key publication dates, mandatory in-force boundaries, and formal withdrawal events across the BS 7671:2018 cycle.

DateEdition / StandardStandingMilestone & Technical Scope
BS 7671:2018 (Blue Book)PUBLISHEDBase 18th Edition published by the IET and BSI, commencing the 6-month transition period.
BS 7671:2018 (Blue Book)IN EFFECTCame into full mandatory effect across the UK; 17th Edition (BS 7671:2008+A3:2015) withdrawn.
Amendment 1:2020IN EFFECTPublished as standalone update with immediate effect, overhauling Section 722 EV open-PEN earthing.
Amendment 2:2022 (Brown Book)PUBLISHEDConsolidated Brown Book published, introducing AFDD mandates, Chapter 82, and revised SPDs.
Amendment 2:2022 (Brown Book)IN EFFECTTransition concluded; BS 7671:2018+A1:2020 formally withdrawn and superseded by A2:2022.
Amendment 3:2024IN EFFECTPublished as free PDF with immediate effect governing bidirectional protective devices (Reg 530.3.201).
Amendment 4:2026 (Orange Book)PUBLISHEDAmendment 4 published, introducing stationary batteries, PoE Section 716, and EICR C3/FI clarification.
BS 7671:2018+A4:2026CURRENT STANDARDTransition concluded: A4:2026 is sole current UK wiring standard; A2:2022 and A3:2024 formally withdrawn.

Section 722 Electric Vehicle Charging Equipment Evolution

Special location requirements for Electric Vehicle charging installations did not originate with Amendment 4. Section 722 was originally introduced into BS 7671 in 2013 via Amendment 2 to the 17th Edition (BS 7671:2008+A2:2013), and formed an integral part of the 2018 base Blue Book. Amendment 1:2020 specifically overhauled Regulation 722.411.4.1 regarding open-PEN protective devices for PME supplies, requirements which were subsequently consolidated into Amendment 2:2022 and carried forward into Amendment 4:2026.

Statutory Demarcation & Non-Retrospective Principle

BS 7671 is a non-statutory standard that provides engineering methods for satisfying the statutory duties of the Electricity at Work Regulations 1989 (EAWR). Under the fundamental non-retrospective principle of UK electrical safety, existing installations designed and verified in compliance with previous editions or amendments do not automatically fail periodic inspection (EICR) or require immediate upgrading, provided they remain in a safe, serviceable condition in accordance with EAWR Regulation 4(1) and 4(2).

This tracker reports what changed and when. It does not provide design advice or compliance instructions. Always consult the published BS 7671:2018+A4:2026 standard and your competent person scheme provider guidance.

Last verified: 18 October 2026 • BS 7671:2018+A4:2026

Sparks Switchboard
Quick: